Our e-TAP 7.4 kW 7 meter length Tesla mobile charger can be used to charge your Tesla from a red 32A 3-phase CEE socket. The power is adjustable to 6A, 10A, 13A, 16A, 20A, 25A or 32A. Your electric vehicle will charge at a maximum rate of 7.4 kW. The type 2 connector has the very convenient Tesla button built-in. (The charger can be used to charge other type 2 cars as well!)
The charger has a multitude of safety features, including monitoring of the CEE plug temperature, AC and DC residual current leak detection, overheating, ...
Please make sure you charge from a correctly installed blue 32A CEE socket as depicted on the left, that is rated to deliver 32A, installed with minimum 6mm² wires. You can order a high quality wall socket that is IP 67 rated for in- or outdoor use with the charger.
The charger features:
- Earth leakage protection (AC and DC)
- Internal current switching problem detection
- Over current protection
- Over voltage protection
- Low voltage protection
- Short circuit protection
- Overheat protection
- Wall plug overheat protection
- Adjustable charging amps (6/10/13/16/20/25/32A)
This mobile charger will also work in case neutral and phase are reversed or when neutral is missing alltogether (3 x 230V network). This is where the Tesla supplied mobile charger will fail to charge... Our charger will work and provides a much cheaper alternative to the Tesla supplied Mennekes Schuko, with the added benefit of having the Tesla control button in the plug!
Download the e-TAP manual by clicking here
Specifications:
Connector |
Type 2 female plug with Tesla control button |
Cable |
Single phase, 3 x 6mm² + 0.75mm². Rated charging current: 32A (7.4 kW charging capability)* |
Color |
Grey / Blue / Black |
IP Rating |
IP65 |
Electric supply connector |
CEE32A commando socket (blue 3-pin plug for 32A) |
Housing & Dimensions |
Aluminium housing: heigth: 50mm x width: 80mm x length: 190mm - Total Cable length: 7m |
Weight |
3,35 kg |
Charging Specification |
Mode 3 / IEC 61851 communication unit Compliant to: withIEC 62196, IEC 61851-1, CE, EMC, RoHS |
Charging Output |
32A / Single Phase unit: max 7.4kW @ 230V |
Overcurrent & Fault Protection |
RCD typeA-EV (30mA AC, 6mA DC) |
Status Indication |
Tri-Colour LED |
Operating temperature |
–25°C to 50°C |
*Max current and charging time depends on the characteristics of the electric vehicle that is being charged. The EVSE can limit max current in extreme temperatures.